Re: [SLUG] pump failed

From: Glen (gurensan@tampabay.rr.com)
Date: Fri Mar 29 2002 - 17:35:08 EST


If you've got roadrunner at home, you've got DHCP unless you are paying not
to. If pump is failing every time, check to see if the modem's working,
barring that, you're pretty much on your own as far as TW's concerned. I
don't usually use pump; I use the dhcp from the ISC (internet software
consortium). It works pretty well.

Chances are if you can't get an IP, it's either the modem, the line, or the
NIC. Most modern distros don't screw up the network setup so bad that you
can't at least get an IP, but it's possible. If this a the machine that's
dual booting windows, that's probably the problem ;)

        Glen

On Friday 29 March 2002 14:01, you wrote:
> I'm running 'pump' at the command prompt as root.
> It says "Operation failed." and my eth0 doesn't get an IP. I don't
> know if I was statically addressed earlier or not, but I wasn't able
> to resolve names, so I decided to investigate pump, and that's how I
> saw this error upon running it.
>
> Second question: Is this supposed to be this way?
> /etc/resolv.conf -> ../tmp/resolv.conf
>
> I don't see a /tmp/resolv.conf anyway.
>
> Mario



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:57:10 EDT