Hi folks -- hope someone will point out my error.
I've got SuSE 7.3 and the most recent version of cdrtools, and
I've upgraded the firmware on my CD-RW drive, and yet I can't manage
to burn an audio CD,even with "speed=1". BUT -- I can write data CDs
just fine. I'm using the same media in both cases (Imation 700MB).
If anyone spots my mistake, or can offer useful questions or answers,
I'd be most appreciative.
Here's sample output from making a data CD:
bernie:/tmp/gnut/coyote # mkisofs -J -r -o /tmp/coyoteugly.iso *
15.89% done, estimate finish Fri Apr 5 15:21:15 2002
31.79% done, estimate finish Fri Apr 5 15:21:21 2002
47.69% done, estimate finish Fri Apr 5 15:21:25 2002
63.60% done, estimate finish Fri Apr 5 15:21:26 2002
79.47% done, estimate finish Fri Apr 5 15:21:26 2002
95.37% done, estimate finish Fri Apr 5 15:21:26 2002
Total translation table size: 0
Total rockridge attributes bytes: 1509
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 7ba4
31472 extents written (61 Mb)
bernie:/tmp/gnut/coyote # cdrecord -dev 0,0,0 -speed 12 -data
/tmp/coyoteugly.iso
Cdrecord 1.11a19 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.6'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8120B '
Revision : '2.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Starting to write CD/DVD at speed 12 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Track 01: Total bytes read/written: 64454656/64454656 (31472 sectors).
That CD works fine. Now here's an attempt to burn two .cdr files (I've
tried making .cdr files with both xmms and (mpg123 | sox)) as CD-Audio:
bernie:/tmp/gnut/stld # cdrecord -dev 0,0,0 -speed 12 -audio -pad -dummy
-v -v *cdr
Cdrecord 1.11a19 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.6'
Using libscg transport code version 'schily-%M%-%I%'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8120B '
Revision : '2.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 5185536 = 5064 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 38 MB (03:50.33) no preemp swab
Track 02: audio 44 MB (04:25.90) no preemp swab
track: 1 start: 0 pregap: 150
track: 2 start: 17425 pregap: 150
Total size: 83 MB (08:18.24) = 37368 sectors
Lout start: 84 MB (08:20/18) = 37368 sectors
01 00 00 01 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 02 00 00 00 03 34 19
01 02 01 00 00 03 36 19
01 AA 01 01 00 08 14 12
Track 1 start 0
Track 2 start 17425
Track 3 start 37368
01 00 A0 00 00 00 00 01 00 00 00 00
01 00 A1 00 00 00 00 02 00 00 00 00
01 00 A2 00 00 00 00 08 20 18 00 00
01 00 01 00 00 00 00 00 02 00 00 00
01 00 02 00 00 00 00 03 54 25 00 00
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 322481
Starting to write CD/DVD at speed 12 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 38 MB written.cdrecord: Input/output error. write_g1:
scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 40s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 5.031s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.004s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
And here's some info on my system.
uname:
Linux bernie 2.4.10-4GB #1 Fri Sep 28 17:20:21 GMT 2001 i686 unknown
dmesg:
Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Fri Sep 28 17:20:21 GMT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 65472
zone(0): 4096 pages.
zone(1): 61376 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0317 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 730.977 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1458.17 BogoMIPS
Memory: 254656k/261888k available (1289k kernel code, 6844k reserved, 381k data, 124k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 730.9663 MHz.
..... host bus clock speed is 132.9027 MHz.
cpu: 0, clocks: 1329027, slice: 664513
CPU0<T0:1329024,T1:664496,D:15,S:664513,C:1329027>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
vesafb: framebuffer at 0xf2000000, mapped to 0xd0800000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0393
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for boot splash picture.... found (1024x768, 32431 bytes).
Initializing splash screen... done.
Console: switching to colour frame buffer device 104x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD102BB, ATA DISK drive
hdb: WDC AC36400L, ATA DISK drive
hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 20028960 sectors (10255 MB) w/2048KiB Cache, CHS=1246/255/63, UDMA(100)
hdb: 12594960 sectors (6449 MB) w/256KiB Cache, CHS=784/255/63, UDMA(33)
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 < hdb5 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing.....................................................done.
Freeing initrd memory: 591k freed
VFS: Mounted root (ext2 filesystem).
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: CD-RW CED-8120B Rev: 2.00
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Journalled Block Device driver loaded
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 124k freed
Adding Swap: 498004k swap-space (priority 42)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.9, 5 Sep 2001 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (c)2000 Netfilter core team
ip_conntrack (2046 buckets, 16368 max)
PCI: Found IRQ 3 for device 01:0d.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:0d.0: 3Com PCI 3c905C Tornado at 0xdc00. Vers LK1.1.16
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xef80, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: :USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x5a9/0x511) is not claimed by any active driver.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
Linux video capture interface: v1.00
usb.c: registered new driver ov511
ov511.c: USB OV511 camera found
ov511.c: camera: generic model (no ID)
ov511.c: Sensor is an OV76BE
ov511.c: OV511 USB Camera Driver v1.41
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(88)
parport0: assign_addrs: aa5500ff(88)
parport0: Printer, Hewlett-Packard HP LaserJet 6L
lp0: using parport0 (polling).
PCI: Found IRQ 11 for device 01:0a.0
eth0: no IPv6 routers present
Switching off penguin.
Thanks in advance,
Ben
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:49:41 EDT