On Wed, 2003-01-08 at 11:20, Andrew Wyatt wrote:
> Crack the case, look for a set of dip switches on the system board,
> toggle SW1 wait 5 seconds, and toggle it back. That should reset the
> password.
>
> -Andrew
>
My bad, it's SW7 on the series 4, SW1 on the series 400. The DIN switch
bank is red, and it is located right in front of the CPU.
-Andrew
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 13:05:05 EDT