Please shed some light on this problem:
initrd? If something goes wrong how can one back out?
server1:/cdrom/packages/Linux/driver_package # rpm -Uvh *.rpm
aacraid
##################################################
Adaptec aacraid driver installer - V1.3
úë2¤LILO
Using LILO configuration
file: Using regular magic file `/tmp/magic6400'
Configuration [linux]
****** PROBLEM *******
Kernel /boot/vmlinuz is not configured to use initrd. Skipping.
TO FIX THIS PROBLEM:
Modify /etc/lilo.conf for this config to use an initrd
(e.g. initrd=/boot/initrd-2.4.20-4GB.img)
**********************
file: Using regular magic file `/tmp/magic6400'
Configuration [suse]
****** PROBLEM *******
Kernel /boot/vmlinuz.suse is not configured to use initrd. Skipping.
TO FIX THIS PROBLEM:
Modify /etc/lilo.conf for this config to use an initrd
(e.g. initrd=/boot/initrd-2.4.20-4GB.img)
**********************
***************************************
******** NO MODULES INSTALLED *********
***************************************
Done.
execution of aacraid-1.1.3-1653 script failed, exit status 1
server1:/cdrom/packages/Linux/driver_package #
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:50:38 EDT