This sounds more like a hardware problem. Perhaps it is time to replace the power supply.
-----Original Message-----
From: Ronald KA4INM Youvan <ka4inm@tampabay.rr.com>
Sent: Dec 19, 2003 12:09 AM
To: slug <slug@nks.net>
Subject: [SLUG] Like winblows 98 problem
I have a M$ problem, (with LINUX): just after I install a new
version of Slackware, when I issue a halt command the process
ends with the ATX power supply powering down. After 3 or 4
days it doesn't power down. If I press the <power> button
it doesn't turn the power supply off, I must press <reset>
wait for the beep and press the <power> button to power it down.
Am I alone with this problem?
Is there a fix or a better work around?
--
73 (= Best Regards) de: Ron ka4inm@tampabay.rr.com
100% LINUX, since July, 1997 SENT Time and Date are UTC
Visit my HAM Web SITE at: http://www.qsl.net/ka4inm
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:48:09 EDT