----- Original Message -----
From: Seth Hollen <seth@hollen.org>
Date: Sunday, January 25, 2004 10:44 pm
Subject: RE: [SLUG] ATA Raid Controller
> What model? I missed the original post. Take care,
> Seth
> seth@opentechinc.net
> 727-919-1598
>
> --Open Tech Inc.--
<snip>
Has anyone had any experience with the Promise
FastTrack UDMA 100 IDE Raid controller under Linux?
I'm currently in the process of setting up a server
and will be running Slackware 9.1 and have this
controller installed. I have been scouring the Net
(including Googling) to identify how to get Slack to
address the Raid 1 mirrored array. I found some
sites that say it should be under /dev/ataraid but I
don't show any devices listed although I do show a
/dev/ataraid. When putting the Slackware 9.1 CD and
booting I choose the ataraid.i kernel so it will
load the correct module but still can't figure out
how to mount the array to fdisk (fdisk
/dev/ataraid/d0px or whatever). Any help would be
greatly appreciated.
As always, thank you for your assistance.
Pace
</snip>
The model is the FastTrack 100. I'm attempting to
install it on Slacware 9.1 but wasn't even able to
get it to go with Fedora.
Thanks again for any assistance.
PeACE
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:30:26 EDT