Logan Tygart wrote:
>On Sun, 2004-04-11 at 08:07, Maurice Wilson wrote:
>
>
>>I need to add the following drive in my fstab in Fedora.
>>Hardware reports drive as (device: hdc1) (start: 1 ) (end: 667 ) (size
>>mb : 4924) (type: fat32)
>>Drive/dev/hdc (Geom:667/240/63) (Model: WDC A C35100L)
>>I ran id in term and it reported id=500
>>
>>I use it as a backup drive , thanks for any help
>>
>>existing fstab below
>>
>>LABEL=/ / ext3 defaults 1 1
>>LABEL=/boot /boot ext3 defaults 1 2
>>none /dev/pts devpts gid=5,mode=620 0 0
>>none /proc proc defaults 0 0
>>none /dev/shm tmpfs defaults 0 0
>>/dev/hda3 swap swap defaults 0 0
>>/dev/cdrom /mnt/cdrom udf,iso9660
>>noauto,owner,kudzu,ro 0 0
>>/dev/fd0 /mnt/floppy auto
>>noauto,owner,kudzu 0 0
>>
>>
>>
>
>If it is external
>
>Add (as one line):
>
>/dev/hdc1
>name of mount point (e.g. /backup)
>auto
>noauto,owner,kudzu 0 0
>
>If it is internal
>
>/dev/hdc1
>name of mount point (e.g. /backup)
>vfat
>defaults 1 2
>
>Remember, if the mount point does not exist (/backup) you will have to
>create it.
>
>The Logan
>
>
No Joy? I entered the following line in fstab
/dev/hdc1 /backup vfat defaults 1 2
When i tried to reboot I got the following message
Warning...fsck for device /dev/hdc1 exited with signal 11
The drive is removeable so I just shut down, removed it and rebooted and
am back to normal
(square one) any suggestions?? Thanks
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:28:22 EDT