> > ++++++++++++++++++++++++++
> > [Dialer Defaults]
> > Carrier Check = no
> > Modem = /dev/ttySL0
> > Baud = 460800
What kind of baud rate is this? I have never seen a
value higher than 115200 and that is just internal,
the external side generally 38400 or 56200
(more later)
> > Init1 = ATZ
> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ISDN = 0
> > ;Dial Command = ATX3DT
> > Modem Type = Analog Modem
> > Phone = 98640765
>
> Maybe I missed something, but this isn't a real phone number. Real
phone
> numbers here in the US are 7 digits, or 11 digits if the phone number
is
> long distance (the 11 digits include the preceding '1').
>
> Paul
The way I recall this is that 9 is used to get an outside line,
followed by 1 or 2 commas, which insert a short sleep to
allow time for the outside dial tone to appear, thus you would
see
Phone = 9,,8640765
Also why is the dial command commented out?
- Bob
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:05:50 EDT