Linux version 2.2.20 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 03ef0000 @ 00100000 (usable)
 BIOS-e820: 00010000 @ 03ff0000 (usable)
Detected 266622 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 532.48 BogoMIPS
Memory: 62196k/65536k available (1756k kernel code, 412k reserved, 1020k data, 152k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
CPU: Intel Pentium II (Deschutes) stepping 00
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfa2e4
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5 
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 29
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfe60-0xfe67, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfe68-0xfe6f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4006MAV, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-1602B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4006MAV, 3909MB w/0kB Cache, CHS=993/128/63
hdc: ATAPI 20X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
              This machine does not have any IBM MCA-bus
              or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect: 
3ware Storage Controller device driver for Linux v1.02.00.008.
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 < hda5 >
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 124956k swap-space (priority -1)
NET4: G4KLX/GW4PTS AX.25 for Linux. Version 0.37 for Linux NET4.0
AX.25 Multikiss device enabled
hdlcdrv: (C) 1996 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.6 compiled 11:56:26 Apr 20 2002
soundmodem: (C) 1996-1998 Thomas Sailer, HB9JNX/AE4WA
soundmodem: version 0.8 compiled 11:56:34 Apr 20 2002
AX.25 ethernet driver version 0.01
6pack: Revision: 0.3.0 (dynamic channels, max=256)
CSLIP: code copyright 1989 Regents of the University of California
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
YAM driver version 0.8 by F1OAT/F6FBB
Installing knfsd (copyright (C) 1996 okir@monad.swb.de)
Linux PCMCIA Card Services 3.1.33
  kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002
  options:  [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xf7370
Intel ISA/PCI/CardBus PCIC probe:
  Intel i82365sl B step rev 00 ISA-to-PCMCIA at port 0x3e0 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 3,4,7,10 polling interval = 1000 ms
cs: memory probe 0x0d0000-0x0dffff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0230-0x032f: clean.
cs: IO port probe 0x0338-0x0377: clean.
cs: IO port probe 0x0380-0x0387: clean.
cs: IO port probe 0x0390-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
hde: LEXAR ATA FLASH, ATA DISK drive
ide2 at 0x100-0x107,0x10e on irq 3
hde: LEXAR ATA FLASH, 246MB w/1kB Cache, CHS=984/16/32
 hde: hde1
ide_cs: hde: Vcc = 5.0, Vpp = 0.0
VFS: Disk change detected on device ide2(33,0)
 hde: hde1
hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hde: drive_cmd: error=0x04 { DriveStatusError }
hermes.c: 16 Jan 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs: GetNextTuple: No more items
VFS: Disk change detected on device ide2(33,1)
 hde: hde1
VFS: Disk change detected on device ide2(33,1)
 hde: hde1