On Sun, 21 Nov 2004 17:54:19 -0500, John Brown <photo.man@knology.net> wrote:
> On Sun, 2004-11-21 at 14:48, jeff wrote:
>
>
> > On Sunday 21 November 2004 1:42, Chuck Hast wrote:
> > > No it was not. I did load it. Now I guess I have to figure out which
> > > type of FS it
> > > wants to load, I tried the sda, b, c etc, also hde (I see some mount them
> > > as hde...)
> >
> > Just a thought, but does the camera FS work like the Iomega Zip disks? They
> > mount as /dev/sda4 for some reason. Maybe the camera needs to mount as a
> > partition number rather than just /dev/sda.
> >
> > Jeff.
>
> Maybe my experience will help...
> As root, check "lsmod" for the modules: usb-storage, and usbcore.
> As root, use "cdrecord -scanbus" to scan the whole scsi chain.
> Example:
> <snip>
> scsibus2:
> 2,0,0 200) 'SanDisk ' 'Cruzer Mini ' '0.1 ' Removable Disk
> 2,1,0 201) *
> 2,2,0 202) *
> 2,3,0 203) *
> 2,4,0 204) *
> 2,5,0 205) *
> 2,6,0 206) *
> 2,7,0 207) *
>
> As root, use "tail /var/log/messages" to get the partition number, if it
> is reading it.
>
> I setup fstab for all useful scsi devices
>
> /dev/sdb1 /mnt/scsi2 vfat noauto,user,rw 0 0
> /dev/sdd1 /mnt/scsi4 vfat noauto,user,rw 0 0
> /dev/sdc1 /mnt/scsi3 vfat noauto,user,rw 0 0
>
> When I plug something in, I run the cdrecord command and mount the
> appropriate scsi number. Typically, scsi devices need the partition
> number to mount.
> --JB
I am getting good data from all of you, thank you I will try all I
have been given
and get back with y'all!!
So much Linux, so little time!!1
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:55:08 EDT