OK, I have a NEC 2510A DVD writer. I've successfully burned CD-R, CD-RW and
DVD-RW. However, every attempt to burn DVD+R gives a sequence that's
error-free until:
Track 01: Total bytes read/written: 2209644544/2209644544 (1078928 sectors).
./cdrecord/dvdrecord: Input/output error. close track/session: scsi sendcmd:
no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
The command used was:
./cdrecord/dvdrecord dev=0,0,0 speed=8 -ignsize /scratch/melanie.iso
(It would refuse to burn a disc >90 minutes without the "ignsize"; odd for a
program to control a DVD writer to do so.)
The drive is IDE, with ide-scsi set up so it appears to be at SCSI 0 on the
first bus. I have kernel 2.4.26 and dvdrecord from a freshly-compiled
"dvdrtools v0.1.4". Has anybody burned DVD+R successfully with a similar
setup? GUI frontends to [c|dv]drtools or mkisofs aren't necessities; I'm
not scared of a CLI.
--
-eben ebQenW1@EtaRmpTabYayU.rIr.OcoPm home.tampabay.rr.com/hactar
He who will not reason is a bigot; he who cannot is a fool;
and he who dares not is a slave. -Sir William Drummond
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:24:41 EDT