On Tue, 2005-06-14 at 12:19 -0600, Chuck Hast wrote:
> >
> > If it's a hardware router it may be possible to turn off UPnP. I've
> > read a couple of articles about it. Google it's model number or post it
> > here to see if we can find a way to disable it.
> >
>
> Yea, it is the router, both of the buggers generate it. I had a LinkSys
> Network everywhere in there and pulled it out and replaced it with a
> LinkSys BEFSR41 V3, and it is just as bad if not worse.
>
> I guess that stuff is great if you can use it for something, but so far
> all I see is that crap klobbering my network...
>
>
Chuck,
According to the BEFSR41V3 Manual at:
ftp://ftp.linksys.com/pdf/befsr41V3_ug.pdf
Page 33 of the PDF (page 27 of the manual) un-check all UPnP forwarding
Page 36 of the PDF (page 30 of the manual) set UPnP to Disabled
And make sure you save your changes.
Then make sure you have run the Gibson UPnP disabler on any Windows
Boxes you have on your network just in case the router is doing
something as a result of them doing a multicast.
Mike Branda Jr.
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:10:57 EDT