On Saturday 03 June 2006 01:25, Eben King wrote:
<snip>
>
> Even if magic happened and they rejumpered themselves, the drive that is
> now hda is going bad, so that's the one that needs to be replaced.
> OK, it did this, and that's with the replacement (flat) cable:
>
> May 27 06:12:10 pc kernel: hdb: dma_timer_expiry: dma status == 0x61
> May 27 06:12:10 pc kernel: hdb: DMA timeout error
> May 27 06:12:10 pc kernel: hdb: dma timeout error: status=0xd0 { Busy }
> May 27 06:12:10 pc kernel: ide: failed opcode was: unknown
> May 27 06:12:10 pc kernel: hda: DMA disabled
> May 27 06:12:10 pc kernel: hdb: DMA disabled
> May 27 06:12:10 pc kernel: ide0: reset: success
>
> I'll rewire the devices to separate cables to make sure it's hdb alone, but
> it looks like it is.
b looked bad? Now it's the never-moved a?
I'd run the vendor diagnostics on it.
--Jason Boxman http://edseek.com/ - Linux and FOSS stuff
----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:01:12 EDT