On 3/28/07, ronan <ronan@tampabay.rr.com> wrote:
> Chuck Hast wrote:
> > On 3/27/07, Levi Bard <taktaktaktaktaktaktaktaktaktak@gmail.com> wrote:
> >> > I see the device hde shown, but I also see that it shows 0 sectors,
> >> and there is
> >> > a 1G card plugged into it.
> >>
> >> Wait, is this a 351M HD, or is it a 1G card?
> >>
> > I have two threads mixed here. Forget about the 1G SD card... I am sorry.
> >
> > I was able to mount the HD on a 2.4 system just fine and get what I
> > needed
> > off of it. Funny it will not mount on my 2.6 systems. Got to figure
> > that one
> > out, but right now I got the data out of it.
> >
> >
> Does your 2.6 system have SCSI support compiled in, or available as a
> module? Is the module loaded/loadable?
>
Yes, the HD carrier is one of those boxes you put a laptop HD in and then
plug the whole thing into a USB port. If I put a 12G HD into it and plug it in
it loads and comes on line just fine, but when I remove the 12G HD and
stick in the little 351M HD it will not load it.
Same HD box just swap out the 12G for the 351M disk and no joy...
-- Chuck Hast -- KP4DJT -- To paraphrase my flight instructor; "the only dumb question is the one you DID NOT ask resulting in my going out and having to identify your bits and pieces in the midst of torn and twisted metal." ----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 15:58:57 EDT