I do not disagree.
The posted web sites though do but what do I know so I will bow to superior
knowledge.
SOTL
On Friday 08 June 2007 06:14, Ken Elliott wrote:
> >> If you can design tanks with it you can design anything with it.
>
> Far from it. Tanks are simple geometry. Streight edges, flat sides, etc.
> Items with smooth curved surfaces are much more difficult. Think car
> bodies, boats, consumer goods.
>
> Compare the Stealth Figher vs. the B2 Stealth Bommer. The figher is all
> flat sides due to the limitations of the software and cpu horsepower used
> at the time. NURBS and fast computers allowed for the complex calculations
> required for a complex curved surfaces.
>
> But if you disagree, that's fine. I've only been using CAD systems for 25
> years and I could be wrong...
>
> Ken Elliott
>
> =====================
> -----Original Message-----
> From: slug@nks.net [mailto:slug@nks.net] On Behalf Of SOTL
> Sent: Saturday, June 09, 2007 10:16 AM
> To: slug@nks.net
> Subject: Re: [SLUG] Real World Class 3D modeler for Linux
>
> If you can design tanks with it you can design anything with it.
> http://ftp.brlcad.org/VolumeIII-Principles_of_Effective_Modeling.pdf
> http://www.brlcad.org/reports/arl-tr-315/index.html
> http://www.brlcad.org/reports/arl-mr-103/index.html
> http://en.wikipedia.org/wiki/BRL-CAD
> http://brlcad.survice.com/mirror/BRLCAD/ftp.arl.army.mil/brlcad/preGPL/gall
>e ry/index.html
> http://ftp.arl.mil/brlcad/preGPL/gallery/hst_caption.html
>
>
> I have looked extensively but there are 3 BRI-CAD web sites. Two I found
> but it is the third that will answer your questions about modeling. I can
> not find the site since the home site was changed or updated if you will.
>
> SOTL
>
> On Thursday 07 June 2007 19:27, Ken Elliott wrote:
> > >> Try this
> > >> http://www.brlcad.org/
> >
> > Too limited. It might be a great product for some, but for any
> > professional it would be far to limited.
> >
> > CSG modelers like BriCAD simply cannot model at the same level as a
> > good NURBS modeler, like Rhino. CSG modelers construct the model by
> > combining several simple geometric shapes. Modeling a ball in a CSG
> > modeler would be constructed of many triangles. Too few and the
> > surface would have flat spots like a diamond. Too may and the file
> > size gets extremely large. A CSG modeler would be suitable for a
> > house, since it's mostly a series of boxes (walls), but it is nearly
> > impossible to create an egg carton or modern car body. NURBS (when
> > properly done) give you the ability to control the model shape with
> > control handles. Rhino is like modeling clay, yet it's fast and the
> > file size is tiny. Comparing the two is like comparing a modern Linux
> > distro with Windows 1.0. To the casual user, they may look somewhat
> > alike, but under the hood they couldn't be more different.
> >
> > On Linux, tools like PTC's ProEngineer have capabilities far beyond
> > anything free or low cost. Rhino won't do everything ProE does, but
> > it can do some things that ProE can't. Rhino is used by some F1 teams
> > for modeling their aero parts. Nuff said.
> >
> > Ken Elliott
> >
> > =====================
> > -----Original Message-----
> > From: slug@nks.net [mailto:slug@nks.net] On Behalf Of SOTL
> > Sent: Friday, June 08, 2007 5:08 PM
> > To: slug@nks.net
> > Subject: Re: [SLUG] Real World Class 3D modeler for Linux
> >
> > On Thursday 07 June 2007 17:53, Ken Elliott wrote:
> > > No, it's not FOSS or Open Source, but Rhino is a fantastic
> > > world-class CAD package. The producer (Robert McNeel and
> > > Associates) seems to be probing to see if there is an interest in a
> > > Linux version. For designers like me, this type of tool is one of
> > > the last reasons I've had to keep a few Windows boxes around.
> > > McNeel has a Mac port in beta, so a Linux version might not be too
> > > hard.
> > >
> > > Product: http://www.rhino3d.com/
> > >
> > > Vote here:
> > > http://offbroadway.blogspot.com/2007/06/rhino-for-mac-os-x.html
> > >
> > > No, it's not free, but compared to the $4,000 to $10,000 price tag
> > > of most CAD packages, Rhino's $995 price is rather reasonable.
> > >
> > > Ken Elliott
> >
> > Try this
> >
> > http://www.brlcad.org/
> >
> > SOTL
> > ----------------------------------------------------------------------
> > - This list is provided as an unmoderated internet service by
> > Networked Knowledge Systems (NKS). Views and opinions expressed in
> > messages posted are those of the author and do not necessarily reflect
> > the official policy or position of NKS or any of its employees.
> >
> > ----------------------------------------------------------------------
> > - This list is provided as an unmoderated internet service by
> > Networked Knowledge Systems (NKS). Views and opinions expressed in
> > messages posted are those of the author and do not necessarily reflect
> > the official policy or position of NKS or any of its employees.
>
> -----------------------------------------------------------------------
> This list is provided as an unmoderated internet service by Networked
> Knowledge Systems (NKS). Views and opinions expressed in messages posted
> are those of the author and do not necessarily reflect the official policy
> or position of NKS or any of its employees.
>
> -----------------------------------------------------------------------
> This list is provided as an unmoderated internet service by Networked
> Knowledge Systems (NKS). Views and opinions expressed in messages
> posted are those of the author and do not necessarily reflect the
> official policy or position of NKS or any of its employees.
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:03:17 EDT