Thanks, Larry, but when I tried it, it didn't work. Why?
Yet when I do a: modprobe ne io=0x300 irq=10
it gives a positive status and then I see NE2000 in /proc/interrupts
and /proc/ioports
What's going on?
Mario
>In my pc running RH 7.1 with NE2000 nics here is the
>file: /etc/modules.conf
>alias eth0 ne
>options ne io=0x300 irq=10
>
>Then you can observe the results with the command dmesg
>Larry :-)
>
>----- Original Message -----
>From: Mario Lombardo Sent: Sunday, December 16, 2001 5:45 PM
>Subject: [SLUG] Adding a driver module
>
>
>> Using RedHat 7 out of the box, <snip>
> > This card uses the NE2000 NIC driver.
> >
> > Mario
--
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:19:11 EDT