Update on my attempt to print from my SAMBA Slack Server.
I went through apsfilter configuration again and then manually changed the
printers IP number in place of the remote host (rm=) entry. That did it!
FWW, here is the printcap file:
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|Printer1 auto:\
:lp=:\
:rm=10.10.12.7:\
:rp=raw:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/lp:\
:lf=/var/spool/lpd/lp/log:\
:af=/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:
raw1|Printer1 raw:\
:lp=:\
:rm=10.10.12.7:\
:rp=raw:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/raw1:\
:lf=/var/spool/lpd/raw1/log:\
:af=/var/spool/lpd/raw1/acct:\
:mx#0:\
:sf:\
:sh:
# APS1_END - don't delete this
I can see user directories but not the printer from my NT clients yet.
John Clay
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:40:31 EDT