Um usually serivce manuals will not tell you which screw goes where.
Suguesstion get some of the colored sharpies perminate markers mark them as
you take them out both on the screw head and on the boards then you will be
able to match them or use paint markers.
Make it easy on your self by doing this you will have over half the battle
solved!
Hope that helps you.
P.S. If the screws are black use paint markers. If crome use the sharpie
perminate markers.
Enjoy.
B.Preece
----- Original Message -----
From: <wchast@utilpart.com>
To: <slug@nks.net>
Sent: Tuesday, August 20, 2002 7:29 PM
Subject: RE: [SLUG] Need Svc Manuals
> I have to take the several of them apart and then attempt to build up
> a couple of good ones out of the bits and pieces, problem is that there
> are screws that are of the same diameter but different length, the
> long ones in the wrong place can do major damage, I need to get the
> diags so I can make sure I get all the screws in the right place.
> In order to get it down to where I can build up a machine out of
> others, I am going to really have to tear it down the the basics.
>
>
> I know one thing, when ever we look at laptops again, Toshiba will
> NOT be on our list of laptops, one of the requirements will be the
> availability of the service manual on the machine to the owner.
>
> Their response to my question of why they did not sell them or
> in some way have them available to the public was that they only
> sell them to "authorized service shops" Hey even Motorola will
> sell you their Radio Service Software which allows you to change
> the radio in all sort of ways, all you have to do is produce the
> money.
>
> > -----Original Message-----
> > From: Craig Zeigler [mailto:craig@penguindevelopment.com]
> > Sent: Monday, August 19, 2002 11:29 AM
> > To: slug@nks.net
> > Subject: RE: [SLUG] Need Svc Manuals
> >
> >
> > What exactly do you need a service manual for... The parts you can
> > remove are pretty much obvious...
> >
> > -----Original Message-----
> > From: wchast@utilpart.com [mailto:wchast@utilpart.com]
> > Sent: Monday, August 19, 2002 10:20 AM
> > To: slug@nks.net
> > Subject: [SLUG] Need Svc Manuals
> >
> >
> > Do any of you know how or where to get a Toshiba
> > Tecra 8000 Service manual? I have 4 of them I need
> > to take appart and put the good parts on one machine,
> > but so far I have had NO luck getting a service manual
> > Toshiba only sells them to "authorized service providers"
> > which is a pain in the rear when you have a room full
> > of them and people using and breaking them all the time.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:34:58 EDT