Thanks, lspci -v did the trick!
Smitty
p.s. It will run for users, you just need to enter the path /sbin/lspci.
On Sunday 25 August 2002 02:01, you wrote:
> Smitty wrote:
> > I have installed two different nics ( a linksys and a d-link) for a lan
> > in a box I intend to use as a firewall. /proc/pci shows 6 pci devices
> > and there are a total of 5 pci cards mounted. Are there any utilities I
> > can use to ensure that both nics are recognized.
> > Smitty
>
> lspci -v {might have to be run as root}
> ifconfig -a {might have to be run as root}
>
> --ronan
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:59:09 EDT