Logan Tygart wrote:
> On Thu, 2002-09-26 at 08:57, John Clay wrote:
> <snip>
> > xeroxv4:\
> > :sh:\
> > :ml=0:\
> > :mx=0:\
> > :sd=/var/spool/lpd/xeroxv4:\
> > :af=/var/spool/lpd/xeroxv4/xeroxv4.acct:\
> > :rm=10.10.12.5:\
> > :rp=lp:\
> > :lpd_bounce=true:\
> > :if=/usr/share/printconf/util/mf_wrapper:
> >
>
> Try adding lp| before the xeroxv4:\ so it looks like:
>
> lp| xeroxv4:\
>
> Ensure the space is after the pipe.
>
> Hope this helps,
> --
> Logan Tygart
> Systems Administrator/Analyst/Engineer
> Registered Linux User 277727 GnuPG A581AC1E ICQ 72101412
> 10:15am up 168 days, 21:48, 1 user, load average: 0.00, 0.00, 0.00
Thanks Logan - I just tried it but since its RH I had to move the
xeroxv5 entry into ect/printcap.local. Stop/start lpd. Fired up the RH
printool and neither lp nor lp| xeroxv5 appeared. Opened a file and went
to "print", neither lp nor lp|xeroxv5 appeared. lp does appear in the
LaserJet control panel and the Print Job Adminstration tool. Went to
shell:
# lpstat lp
JetDirect lpd: no entries
#lp stat xeroxv4 (a previously created queue)
JetDirect lpd: no entries
#
System seems to think that this lpd queue is a JetDirect queue.
I'm out of ideas.
Thanks again
John Clay
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:01:43 EDT