Yep that is what it is, I will go to IBM and see what
they say about it, it is their drive.
> -----Original Message-----
> From: bpreece1@tampabay.rr.com [mailto:bpreece1@tampabay.rr.com]
> Sent: Tuesday, October 15, 2002 06:18 PM
> To: slug@nks.net
> Subject: Re: [SLUG] Problem with new HD
>
>
> If the Mother Board is a Super Socket 7 or a PII the maximum
> they usually
> support is 30 gig.
> In which case you would have to get a ide controller card
> such as a SIIG
> from Best Buys or Comp USA for around $35-$45.00.
>
> Also be sure to check the hard drive documentation and check
> either the
> Mother Board Support website or the Computer OEM if it is a
> name brand to
> see what they tell you. Also make sure your jumpers is set properly.
>
> Good Luck.
> Bill Preece
>
>
>
>
> ----- Original Message -----
> From: <wchast@utilpart.com>
> To: <slug@nks.net>
> Sent: Tuesday, October 15, 2002 5:58 PM
> Subject: [SLUG] Problem with new HD
>
>
> > I am building up a file server, I am installing a 82G
> > HD on it. When I fire the thing up it gets as far as
> > the bios screen that has a list of hardware on it.
> > For the first master HD is says LBA ,UDMA 2
> > and the cursor goes just past that two and stops, it
> > will not boot any farther. The MOBO is a 30)Mhz board
> > with a Pent. on it.
> >
> > I am wondering if the HD is too big for this MOBO?
> >
> >
> >
> --------------------------------------------------------------
> ---------
> > Chuck Hast
> > Telecomms Consultant, Utility Partners.
> > WEB www.utilpart.com
> > Office number: 813.282.8828 x 1175
> > C-phone number: 813.765.6743
> > E-mail: wchast@utilpart.com
> > SMS < 150 characters: 8137656743@mobile.att.net
> > ARS KP4DJT
> >
> > To paraphrase my flight instructor;
> > "the only dumb question is the one you DID NOT ask
> resulting in my going
> out
> > and
> > having to identify your bits and pieces in the midst of
> torn and twisted
> > metal."
> >
> >
> >
> >
> > *****************************************************************
> > This e-mail and any files transmitted with it are
> confidential and are
> > intended solely for the use of the individual or entity to
> whom it is
> > addressed. If you have received this transmission in error,
> please notify
> > the sender immediately and destroy any hard copies you may
> have printed
> and
> > remove all copies of the e-mail from your hard drive. Opinions,
> conclusions
> > and other information in this message that do not relate to
> the official
> > business of Utility Partners, Inc shall be understood as
> neither given nor
> > endorsed by it.
> >
> > Visit us on the web at http://www.utilpart.com
> > *****************************************************************
> >
> >
>
*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.
Visit us on the web at http://www.utilpart.com
*****************************************************************
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:16:07 EDT