Ronan Heffernan wrote:
>
> Does anyone know, would "cdrecord -scanbus" do a good job at finding
> and identifiying all of these SCSI devices, even though they are not
> CD-R drives?
>
> --ronan
>
It identifies the first slot only on my device, but it does pick up the
device. Here is the output of
cdrecord -scanbus
Cdrecord 1.11a39 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'SONY ' 'CD-RW CRX185E1 ' 'XYS2' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'eUSB ' 'Compact Flash ' '5.03' Removable Disk
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
while cat /proc/scsci/scsi gives
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-RW CRX185E1 Rev: XYS2
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: eUSB Model: Compact Flash Rev: 5.03
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: eUSB Model: SD-MS-SM Rev: 5.03
Type: Direct-Access ANSI SCSI revision: 02
scott
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 13:27:54 EDT