I got it to work... mostly kernel configuration issues. Email me if you
are having 1260 setup problems and we can work through it.
On Sun, 2003-04-20 at 11:53, Eric Jahn wrote:
> This is driving me completely loco. I have the latest SANE/Plustek
> drivers installed as per instructions. I also have all the usb stuff
> compiled in (other usb device works fine) and have compiled "usb
> scanner" as a module, but I can't get the scanner module to load for the
> usb scanner.
>
> when I try (as root)
> #modprobe scanner vendor=0x04b8 product=0x011d
> I get:
> ----
> /lib/modules/2.4.20-gentoo-r1/kernel/drivers/usb/scanner.o: init_module:
> Operation not permitted
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-gentoo-r1/kernel/drivers/usb/scanner.o: insmod
> /lib/modules/2.4.20-gentoo-r1/kernel/drivers/usb/scanner.o failed
> /lib/modules/2.4.20-gentoo-r1/kernel/drivers/usb/scanner.o: insmod
> scanner failed"
> ------
> But the usb system recognizes my scanner (here is the truncated cat
> /proc/bus/usb/devices output, notice it says driver=none):
> ------
> P: Vendor=04b8 ProdID=011d Rev= 1.00
> S: Manufacturer=EPSON
> S: Product=EPSON Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> -------
> I also use a usb flash card reader that loads fine.
>
> As you might have guessed, sane-find-scanner -v finds nothing.
>
> /var/log/kernel says:
> ------
> [kernel] hub.c: new USB device 00:11.2-2,
> assigned address 3Apr 19 14:46:01 [kernel] usb.c: USB device 3
> (vend/prod
> 0x4b8/0x11d) is not claimed by any active driver. [kernel] usb.c: error
> registering usbscanner driverApr 19 23:23:45 Apr 20 00:02:02
> [kernel] usb.c: USB disconnect on device 00:11.2-2 address 3
> Apr 20 00:02:22
> -------
> and dmesg says the same thing. Does anyone know any way to troubleshoot
> this? thank you!
>
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:23:21 EDT