Re: [SLUG] Slack 9.0, S3virge/dx, DPMS
From: Logan Tygart (logan1304@comcast.net)
Date: Fri Sep 05 2003 - 15:56:37 EDT
- Next message: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Previous message: Tom Suzda: "[SLUG] Slack 9.0, S3virge/dx, DPMS"
- In reply to: Tom Suzda: "[SLUG] Slack 9.0, S3virge/dx, DPMS"
- Next in thread: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Reply: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
[ attachment ]
On Fri, 2003-09-05 at 13:40, Tom Suzda wrote:
<snip>
> If I just let it alone, after 10 minutes the monitor goes 'dim'. Looks like
> it's running at half power. Checking the display mode from the OSD, it says
> my H & V polarity are now composite, instead of positive when it's running
> normally.
I had similar experience a few years ago, but not with XFree 4.3. I
cured it by putting:
xset s off
in my .bashrc.
HTH,
Logan
--
2.4.22 14:50:01 up 8 days, 1:59, 1 user, load average: 0.00, 0.14, 0.39
Flavored with Meat! -- Ragu spaghetti sauce label
Registered Linux User 277727 GAIM ICQ 72101412
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
- Next message: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Previous message: Tom Suzda: "[SLUG] Slack 9.0, S3virge/dx, DPMS"
- In reply to: Tom Suzda: "[SLUG] Slack 9.0, S3virge/dx, DPMS"
- Next in thread: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Reply: Tom Suzda: "Re: [SLUG] Slack 9.0, S3virge/dx, DPMS"
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
[ attachment ]
This archive was generated by hypermail 2.1.3
: Fri Aug 01 2014 - 20:19:48 EDT