It's not risky to change cmos settings. I dunno if that will work, but
thats all "she" wrote on the subject acording to google.
-pkj
--- Michael Ritenour <miklr@prodigy.net> wrote:
> I mostly have stayed with the GUI tools, (I do have
> commandline experience though).
> Have ran the KPPP, and tried getting it to find my
> modem, etc. No luck though.
>
> I was just sort of nervous trying this procedure with
> the CMOS COM disable and all, sounds kind of risky,
> but I will try it.
>
> michael ritenour
>
> --- Kevin Poorman <asympoticessence@yahoo.com> wrote:
> > A Google search for "Zoom Modem, model number 3025"
> > yeilded this:
> >
> > After physically installing your PCI modem enter
> > your CMOS setup and
> > disable COM2 (Serial Port Boot into Linux and log in
> > as root. Then run:
> >
> > cat /proc/pci
> >
> > Look at the output and locate the "bus" entry for
> > your modem. You need
> > to locate the IRQ and the base I/O address for the
> > modem. Here is an
> > example of the modem output:
> >
> > Non-prefetchable 32 bit memory at 0x00000000.
> >
> > Bus 0, device 17, function 0:
> > Communication controller: Unknown vendor Unknown
> > device (rev 0).
> > Vendor id=1ac1. Device id=480.
> > Medium devsel. Fast back-to-back capable. IRQ 3.
> > Master Capable.
> > No bursts.
> > Min Gnt=252.Max Lat=14
> > Non-prefetchable 32 bit memory at 0xe4000000.
> > I/O at 0xb800 [0xb801]
> >
> > Note in the output above the IRQ is 3 and the base
> > I/O is 0xb800. This
> > is common for 56K PCI modem with COM2 disabled. Now
> > link the modem to
> > COM2 (/dev/ttyS1):
> >
> > ln -s /dev/ttyS1 /dev/modem
> >
> > Add this line to your /etc/rc.d/rc.local file using
> > the IRQ and base
> > I/O address that you found above:
> >
> > setserial /dev/modem uart 16550A port 0x6400 irq 11
> >
> > Then run rc.local:
> >
> > . /etc/rc.d/rc.local
> >
> > You can test your modem by running "minicom" at the
> > command prompt. For
> > example type ATDT18006381483 to dial the phone
> > number. The modem should
> > dial this number. "CTRL-A Q" will quit minicom.
> >
> >
> > --Pkj
> >
> > --- Michael Ritenour <miklr@prodigy.net> wrote:
> > > Can anyone help me set up my Zoom Modem, model
> > number
> > > 3025 (internal, PCI)? This would really make life
> > > easier, as I don't like having to boot into
> > windows,
> > > just to connect to the internet. I would like to
> > make
> > > a clean break from windows on my daily tasks and
> > > research.
> > >
> > > michael ritenour
> > >
> >
>
-----------------------------------------------------------------------
> > > This list is provided as an unmoderated internet
> > service by Networked
> > > Knowledge Systems (NKS). Views and opinions
> > expressed in messages
> > > posted are those of the author and do not
> > necessarily reflect the
> > > official policy or position of NKS or any of its
> > employees.
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Shopping - with improved product
> > search
> > http://shopping.yahoo.com
> >
>
-----------------------------------------------------------------------
> > This list is provided as an unmoderated internet
> > service by Networked
> > Knowledge Systems (NKS). Views and opinions
> > expressed in messages
> > posted are those of the author and do not
> > necessarily reflect the
> > official policy or position of NKS or any of its
> employees.
>
>
-----------------------------------------------------------------------
> This list is provided as an unmoderated internet service by Networked
> Knowledge Systems (NKS). Views and opinions expressed in messages
> posted are those of the author and do not necessarily reflect the
> official policy or position of NKS or any of its employees.
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:53:27 EDT