On Sun, 2004-08-01 at 21:20, Pete S. wrote:
> Thought I would pass this one the the SLUG group. Friend of mine had a
> question...
>
> "I got the embedded development board today.
> http://www.arcom.com/pc104-ixp425-mercury.htm Starting to read over the
> docs. The board itself has Linux installed and ready to go, but in the
> end I will need to learn how to configure and build Linux images.
> Currently my next start is to start application development. The board
> comes with Fedora on three CDs and recomends installing it on a
> development PC, then updating the compiler for cross compiling to the
> x-scale processor. I would compile on the Linux PC, then upload the
> binary to the embedded platform. I was wondering if it would be a
> simpler process to upload gcc and the required libs to the embedded
> platform and compile and develope there? Of course I do not have the
> first idea how to do this. My first quess is that I would need a PC with
> a cross compiler to be able to cross compile the gcc compiler over to
> the xscale. sigh.... Anyway I have a steep learning curve. Any book
> refs. or links would be appreciated."
>
> Thanks,
> Pete
This board doesn't appear to have the onbaord storage to actually upload
a development enviornment onto the board. You could set it up to boot a
NFS partition and have the development environment there, but it is
probably just as easy to install a cross compiler. The development kit
should have instructions for installing a cross compiler.
Jason
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 14:13:15 EDT