On 7/16/05, Kwan Lowe <kwan@digitalhermit.com> wrote:
> Chuck Hast wrote:
> ethtool -s eth0 speed 100 duplex full
> >
> >
> > Hmm, I just tried ethtool and got the following
> > root@fpac-dev:~# ethtool eth0
> > Settings for eth0:
> > No data available
> >
> > Would this be due to the fact that the nic card is a PCMCIA card?
> > It is setting there talking away, so I know it is working. Indeed I am
> > ssh'd into it in order to test that command.
>
>
> If ethtool doesn't work, try mii-tool:
>
> [root@deepthought root]# mii-tool eth0
> eth0: negotiated 100baseTx-FD, link ok
>
> To set the NIC with mii-tool:
>
> mii-tool -F 100baseTx-FD eth0
Here is what happened when I tried that one:
root@fpac-dev:~# mii-tool eth0
SIOCGMIIPHY on 'eth0' failed: Operation not supported
root@fpac-dev:~#
-- Chuck Hast To paraphrase my flight instructor; "the only dumb question is the one you DID NOT ask resulting in my going out and having to identify your bits and pieces in the midst of torn and twisted metal."----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:54:43 EDT