Michael:
Here's specifically how I map my USB devices:
64funky:/home/ejahn# modprobe sg
64funky:/home/ejahn# sg_map
/dev/sg0 /dev/sda
/dev/sg1 /dev/sdb
/dev/sg2 /dev/sdc
/dev/sg3 /dev/sdd
64funky:/home/ejahn# sg_scan -i
/dev/sg0: scsi0 channel=0 id=0 lun=0 [em]
[rmb=0 cmdq=0 pqual=0 pdev=0x0]
/dev/sg1: scsi2 channel=0 id=0 lun=0 [em]
USB2.0 CardReader CF RW 0.0> [rmb=1 cmdq=0 pqual=0 pdev=0x0]
/dev/sg2: scsi2 channel=0 id=0 lun=1 [em]
USB2.0 CardReader Combo 0.0> [rmb=1 cmdq=0 pqual=0 pdev=0x0]
/dev/sg3: scsi3 channel=0 id=0 lun=0 [em]
SanDisk ImageMate II 1.30 [rmb=1 cmdq=0 pqual=0 pdev=0x0]
64funky:/home/ejahn# lsusb
Bus 003 Device 003: ID 07cc:0301 Carry Computer Eng., Co., Ltd 6-in-1
Card Reader
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0781:0002 SanDisk Corp. SDDR-31 ImageMate II
CompactFlash Reader
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 046d:c50b Logitech, Inc.
Bus 001 Device 001: ID 0000:0000
Then go mount them and add entries into your fstab to automate the
mounting. -Eric
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:24:11 EDT