>From the lm_sensors package, I got this from running:
sensors -f
---------------------------------------
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.62 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +2.48 V (min = +2.40 V, max = +2.61 V)
+3.3V: +6.66 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.84 V (min = +4.76 V, max = +5.24 V)
+12V: +12.03 V (min = +11.39 V, max = +12.61 V)
-12V: -0.12 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -9.07 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +5.08 V (min = +4.76 V, max = +5.24 V)
VBat: +3.54 V
fan1: 4753 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM
M/B Temp: +109 F (low = +59 F, high = +104 F) sensor = thermistor
CPU Temp: +120 F (low = +59 F, high = +113 F) sensor = thermistor
Temp3: +118 F (low = +59 F, high = +113 F) sensor = thermistor
eeprom-i2c-0-50
Adapter: SMBus SIS630 adapter at 5080
Memory type: SDR SDRAM DIMM
Memory size (MB): 512
---------------------------------------
ALARM??? My BIOS doesn't read voltages that high. Do you think I should take
action? My computer has been hard-locking for quite some time. I tested the
memory with memtest86 and with Microsoft's memory tester. Both showed good
results. I wonder if it's a thermal thing, but these results don't match
each other (BIOS vs. sensors program), so I can't determine which one is
false.
/mario
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:36:21 EDT