Re: [SLUG] DSL & Telephone Lines

From: SOTL (s0tl155360@earthlink.net)
Date: Tue Jul 18 2006 - 10:32:15 EDT


Richard Smoot wrote:

>On Monday 17 July 2006 21:20, SOTL wrote:
>
>
>>Hi All
>>
>>What a pain doing email in a browser.
>>
>>To start I moved so I no longer live in the old location ie Tampa.
>>
>>I have I think dial up if I can make the phone system work. The issue of
>>making the phone system work has little to do with the phone system and
>>more to do with the big stack of boxes in front of it but that is another
>>story. One issue is that I must run a new phone line and that brings up a
>>interesting question.
>>
>>Comming from Maw Bell, not a Verison system but an old Maw Bell system, the
>>two conductor black cable from the telephone pole connects to the side of
>>the house, enters a lightning errestor, and then passes into the basement
>>where it goes to a junction box.
>>
>>Is there any particular type of wire one must use on the line side feeding
>>to the wall connector that then passes to the eathernet ? I know on the out
>>side of the eathernet modem one needs to use cat 5 but since I am refering
>>to the hardwiring on the input side of the modem not to the output side
>>which uses cat 5 what does one use?
>>
>>Frank
>>-----------------------------------------------------------------------
>>
>>
>Did MAW Bell give you a self install DSL Modem package?
>Normally there is a filter to separate the DSL signal from regular
>phone stuff ans then to the DSL Modem with more or less regular
>phone cable. Then your ethernet comes from the DSL Modem to your
>computer or your router.
>
> Richard Smoot
>

Haven't got to the level of getting DSL yet.

As I understand it the building owner et is responsible for all wiring
installation from building junction box to the actual phone or telephone
device such as a DSL modem. This may be incorrect but that is certainly
the way it is with Verizon and commercial connections in Tampa.

What I am trying to ascertain is there any particular type of wire I
need to use to make this cable run which I intend to do myself since
that will save me several hundard dollars. After the cable run is made
then I will get Maw Bell to make the connections on both ends but the
actual pulling of the cable I will do and that will be a real pain in
the ass so I have no desires to repeat the experience.

Frank

-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 14:47:18 EDT