Re: [SLUG] Heat Sink Framework broken

From: michael hast (evylrobot19@cox.net)
Date: Sat Aug 19 2006 - 22:55:23 EDT


Robert Eanes wrote:
> I just repaired one like your talking about, but the
> break was in a cross member. I don't know if this
> will work with a broken post, but here's my fix:
>
> We have dozens of thick plastic ties sitting around,
> so I cut a piece of the black plastic to fit the
> broken cross member. I used super glue and a pair of
> vice gripps to apply pressure to the plastic. This
> kind of plastic is not readily glued by the superglue.
> Instead, it just kind of melts it. So don't put too
> much on. It does take longer to dry, but when it's
> dry it will have fused the two pieces of plastic
> together. It's important to note that the plastic I'm
> talking about is not the thin floppy plastic like the
> trash ties are made of, but the thick plastic cable
> ties you find in Home Depot. I've not had a lot of
> luck McGivering anything with the thin stuff.
>
> Good Luck.
>
> Rob
>
>
> --- Paul M Foster <paulf@quillandmouse.com> wrote:
>
>
>> I've got a P4 box, my main box, where the frame for
>> the CPU heat sink
>> broke off, and I'm wondering if it's possible to get
>> replacements for
>> that. If you have a P4, you know it's about the size
>> of a 386 CPU, but
>> on top of it sits this massive heatsink/fan block.
>> At least on mine,
>> there are two steel tension clips that clip to a
>> plastic framework and
>> hold the heatsink/fan down onto the CPU. That
>> plastic framework is about
>> an inch to an inch-and-a-half tall, with four
>> plastic "posts" which the
>> spring clips can hook to. Well, the end of one of
>> the posts broke off,
>> and the heatsink/fan came off.
>>
>> Right now, I've got a string of four zip ties
>> holding the fan down on
>> that side. But I'm wondering if anyone's ever heard
>> of this problem, and
>> if a new plastic frame gizmo can be had to replace
>> the old one. Anyone know?
>>
>> --
>> Paul M. Foster
>>
>>
I don't know. I kind of like the way you Southern-engineered it in the
first place, Paul! You should see some of the crap computers that I've
assembled out of stuff I've had lying around. Zip ties and superglue
are one thing. When you use a sawzall to assemble a computer on more
than one occasion... ...guys, I may need professional help...

-- 
"You can tell the ideals of a nation by its advertisements." ~ Norman Douglas

----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:08:44 EDT