>>
>> We have tons of these in our offices all over the world and they work
>> great under linux and the driver is included in SLE 10
>>
>> JP
>>
>>
Okay. Here's where I'm at currently. I can apt-get hplip (albeit
through Kpackage) and the installation returns a result=0. When we did
this on my wife's machine, we went into the printer configuration under
the Control Center, and "added a new printer" through the little GUI
"wizard" type thing. It actually listed the brand, "HP" and model,
"Color Laserjet 4550." Once all that was hooked up, it works great. On
mine, when I go to the same place, "add a new printer," it shows the
brand "ESP." Under model, one of the choices is "HP Laserjet." When I
pick that and send a test print, it never makes it to the printer,
although my machine says that it was sent correctly. I have uninstalled
and reinstalled hplip to see if that would do it, and it did not.
John, since you have clearly worked with this printer under 'nix,
have you ever run into a problem like this? Is there an easy way to
diagnose my problem or configure the printer on the command line? Thx.
--Michael
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:26:07 EDT