Re: [SLUG] Video Capture, want to use Linux.

From: Chuck Hast (wchast@gmail.com)
Date: Wed Dec 20 2006 - 14:39:39 EST


On 12/18/06, Ian C. Blenke <ian@blenke.com> wrote:
> Chuck Hast wrote:
> > Folks,
> > I need to capture a video stream from a camara, at the same time I have a
> > sensor that when activated should go into the recorded video and place
> > a mark
> > about 5 seconds prior to the sensor being activated. What we are
> > wanting to
> > do is monitor a doorway and when it gets a signal from the sensor it
> > grabs
> > the video 5 seconds prior to the alarm and say 5 seconds after, the
> > rest it
> > can toss.
> >
> > I am looking at trying to do a linux solution, sort of looked at
> > MythTV but it
> > looks like it has a lot of bells and whistles, though that is perhaps
> > what I
> > need. The video stream is straight off of the camara so I do not need
> > a tuner
> > card just a raw video card. I can store the data at a low frame rate
> > indeed
> > I would rather have say 3-5 frames/sec and get high resolution images in
> > each frame.
> >
> > Anyone got any recommendations?
>
> ZoneMinder
> http://www.zoneminder.com/
>
I am downloading this one now, will tell you how it looks.

> Motion
> http://www.lavrsen.dk/twiki/bin/view/motion/WebHome
>
This one gives a "no longer here" report, but no link to a new location.

> iomojo
> http://www.iomojo.com/
>
I downloaded this one, I needed to go in and change the address for it
to one on our network, but I was never able to find a password for it.

The docs say admin for the web login, but until I can get that address
changed it is sort of hard to do from the web.

So if I can just find the login/pw for the console I will be able to press
on.

> There are many others. These are just the first that come to mind.
>
> - Ian C. Blenke <ian@blenke.com> http://ian.blenke.com/

-- 
Chuck Hast  -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS).  Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 20:11:53 EDT