As far as I know (2.4.N) ATAPI: does no include the IDE drives, only the SCSI (and USB
emulating SCSI) because ATAPI: is a SCSI command set.
--
Ron KA4INM - Please pay your taxes promptly
our illegal aliens need the benefits!
>> Bypass k3b and use the force, Luke:
>
>> CDR_DEVICE=ATAPI:0,0,0 CDR_SPEED=8 dvdrecord driveropts=burnfree -dao
linux-2007-spring-free-dvd-i586.iso
>
>> (one line)
>
>> Not sure how that "CDR_DEVICE" works; maybe that means "the first compatible writer";
it's hdc, so probably none of those 0s means "the secondary bus".
>
> With the 2.4.N kernels, if you are using an IDE rerecordable you must pass
> (to the kernel at boot time): hdb=ide-scsi (this is from my dmesg)
> or whatever your CD-RW or DVD-RW is) this may be the actual problem.
> (2.6.N kernels, I know not.)
You don't need ide-scsi under 2.6. I used to under 2.4, but not since I upgraded.
> In this case ATAPI:1,2,3 means buss #2, (SCSI or USB the first buss is 0), device @2
on that buss, and LUN #3 (the third slot in the multi slot device, like a 4 slot CD player.
> ATAPI:0,0,0 is buss 1, device 1 and LUN 1 the first of everything.
Shouldn't 0,0,0 represent hda then?
--
Ron KA4INM - Please pay your taxes promptly
our illegal aliens need the benefits!
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 16:58:17 EDT