Hi all!
On boot, I seem to randomly get either of these /dev/ assignments:
HD0: /dev/hda
CDROM0: /dev/hdc
CDROM1: /dev/hdd
-or-
HD0: /dev/hde
CDROM0: /dev/hdg
cdrom1: /dev/hdh
... there seems to be no rhyme or reason for the floppiness.
To get my system working reliably, I have to use UUIDs when available,
otherwise a huge nasty line from /dev/disk.
Example: /dev/disk/by-path/pci-0000:00:14.1-ide-1:1
Poking around freenode led me to belive I am using the 'wrong' kernel
driver.
Can anyone point me in the right direction?
Debian Lenny, Linux epicenter 2.6.26-1-amd64 SMP (standard debian
kernel)
draeath@epicenter:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual
slot PCI-e_GFX and HT3 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge
(external gfx0 port A)
00:05.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
express gpp port B)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
express gpp port C)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI
express gpp port D)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI
Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI
Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation Device 0613 (rev
a2)
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
05:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
05:00.1 Input device controller: Creative Labs SB Audigy Game Port (rev
04)
05:00.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev
04)
05:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller (rev c0)
draeath@epicenter:~$
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:21:46 EDT