[root@localhost e-Smith]# cdrecord dev=0,1,0 speed=2 –eject
/home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
Hi Frank,
Should the above bolded tes say "Downloads"
bob
SOTL wrote:
> Placing a new CD in the burner several attempts were tried at burning CD
>
> Results are as follows:
>
> 1.First Try
> Command entered:
> [root@localhost e-Smith]# cdrecord dev=0,1,0 speed=2 –eject
> /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> Response:
> Cdrecord: WARNING: Track size unknown. Data may not fit on disk.
> Cdrecord: Is a directory. read error on input file
> Cdrecord: fifo had 1 put and 1 gets.
> Cdrecord: fifo was 0times empty and 0 times full, min fill was 100%.
>
> 2. Comand entered by X-Cdroast:
> Command entered:
> [root@localhost e-Smith]# cdrecord dev=0,1,0 fs=16384k –v –userinfo
> speed=2
> –data –eject /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> Response:
> Cdrecord: Bad Option: -userinfo
>
> 3. Third Try ->X-CDRoasr without -userinfo
> Command entered:
> [root@localhost e-Smith]# cdrecord dev=0,1,0 fs=16384k –v speed=2 –eject
>
> /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> Response:
> Same as Try number 4.
>
> 4. Fourth Try
> Command entered:
> [root@localhost e-Smith]# cdrecord dev=0,1,0 –v speed=2 –eject
> /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> Response from fourth try:
> Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,1,0'
> scsibus: 0 target: 1 lun: 0
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'HP '
> Identifikation : 'CD-Writer+ 7200 '
> Revision : '3.01'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 786432 = 768 KB
> FIFO size : 16777216 = 16384 KB
> Track 01: data unknown length
> Total size: 0 MB (00:00.00) = 0 sectors
> Lout start: 0 MB (00:02/00) = 0 sectors
> Current Secsize: 2048
> ATIP start of lead in: -11640 (97:26/60)
> ATIP start of lead out: 337350 (75:00/00)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 9 seconds. 8
> seconds. 7 seconds. 6 seconds. 5
> seconds. 4 seconds. 3 seconds. 2
> seconds. 1 seconds.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01: 0 MB written.cdrecord: is a directory. read error on input
> file
> Cdrecord: fifo had 1 puts and 1 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%
>
> I can record from XCDRoasr but I only get 95% completr before I receive
> an error message.
> By entering commands at the command line I never start recording.
> Basic Question: What am I doing wrong?
>
> Thanks
> Frank
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 15:18:43 EDT