Re: [SLUG] Burning CD - Part 3

From: SOTL (sotl155360@earthlink.net)
Date: Sun Oct 14 2001 - 13:13:24 EDT


Thanks it does in the Linux box.
I had to copy that part by hand into the windows box as I was looking at the
other screen.

My apologies fro the mistake.

Frank

On Sunday 14 October 2001 01:06 pm, Robert Krencis wrote:
> [root@localhost e-Smith]# cdrecord dev=0,1,0 speed=2 –eject
> /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> Hi Frank,
> Should the above bolded tes say "Downloads"
> bob
>
> SOTL wrote:
> > Placing a new CD in the burner several attempts were tried at burning CD
> >
> > Results are as follows:
> >
> > 1.First Try
> > Command entered:
> > [root@localhost e-Smith]# cdrecord dev=0,1,0 speed=2 –eject
> > /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> > Response:
> > Cdrecord: WARNING: Track size unknown. Data may not fit on disk.
> > Cdrecord: Is a directory. read error on input file
> > Cdrecord: fifo had 1 put and 1 gets.
> > Cdrecord: fifo was 0times empty and 0 times full, min fill was 100%.
> >
> > 2. Comand entered by X-Cdroast:
> > Command entered:
> > [root@localhost e-Smith]# cdrecord dev=0,1,0 fs=16384k –v –userinfo
> > speed=2
> > –data –eject /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> > Response:
> > Cdrecord: Bad Option: -userinfo
> >
> > 3. Third Try ->X-CDRoasr without -userinfo
> > Command entered:
> > [root@localhost e-Smith]# cdrecord dev=0,1,0 fs=16384k –v speed=2 –eject
> >
> > /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> > Response:
> > Same as Try number 4.
> >
> > 4. Fourth Try
> > Command entered:
> > [root@localhost e-Smith]# cdrecord dev=0,1,0 –v speed=2 –eject
> > /home/trunk/trunk-Doenloads/e-Smith/e-Smith-4.1.2.iso
> > Response from fourth try:
> > Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '0,1,0'
> > scsibus: 0 target: 1 lun: 0
> > Linux sg driver version: 3.1.17
> > Using libscg version 'schily-0.1'
> > atapi: 1
> > Device type : Removable CD-ROM
> > Version : 0
> > Response Format: 1
> > Vendor_info : 'HP '
> > Identifikation : 'CD-Writer+ 7200 '
> > Revision : '3.01'
> > Device seems to be: Generic mmc CD-RW.
> > Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> > Driver flags : SWABAUDIO
> > Drive buf size : 786432 = 768 KB
> > FIFO size : 16777216 = 16384 KB
> > Track 01: data unknown length
> > Total size: 0 MB (00:00.00) = 0 sectors
> > Lout start: 0 MB (00:02/00) = 0 sectors
> > Current Secsize: 2048
> > ATIP start of lead in: -11640 (97:26/60)
> > ATIP start of lead out: 337350 (75:00/00)
> > Disk type: Long strategy type (Cyanine, AZO or similar)
> > Manuf. index: 3
> > Manufacturer: CMC Magnetics Corporation
> > Starting to write CD/DVD at speed 2 in write mode for single session.
> > Last chance to quit, starting real write in 9 seconds. 8
> > seconds. 7 seconds. 6 seconds. 5
> > seconds. 4 seconds. 3 seconds. 2
> > seconds. 1 seconds.
> > Waiting for reader process to fill input buffer ... input buffer ready.
> > Performing OPC...
> > Starting new track at sector: 0
> > Track 01: 0 MB written.cdrecord: is a directory. read error on input
> > file
> > Cdrecord: fifo had 1 puts and 1 gets.
> > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%
> >
> > I can record from XCDRoasr but I only get 95% completr before I receive
> > an error message.
> > By entering commands at the command line I never start recording.
> > Basic Question: What am I doing wrong?
> >
> > Thanks
> > Frank



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 15:18:54 EDT