On Wed, 2003-10-08 at 23:00, Justin Keyes wrote:
> If you already have an XF86Config file working with a different driver
> (such as the 'nv' or 'vesa' driver), then all you need to do is find
> the relevant Device section and replace the line:
>
> Driver "nv"
> (or Driver "vesa")
>
> with
>
> Driver "nvidia"
>
> In the Module section, make sure you have:
>
> Load "glx"
>
> You should also remove the following lines:
>
> Load "dri"
> Load "GLcore"
> ==============================================================
>
> section. Look at the FAQ (Appendix of the README) and then if nothing helps, post the
> error you are getting, not XF86Config file. Read the questions,
> trust me.
>
> You may also need to fix pam, that's another story, but that
> likely isn't your problem right now.
Ok tried that again and attached is the log file generated when x
attempted to start.
What is Pam?
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:56:21 EDT