Re: [SLUG] SCSI adapter?

From: Craig Zeigler (craig@ctrust.com)
Date: Wed Dec 29 2004 - 13:13:54 EST


Mike Dittmeier wrote:

>Centronics 50 to db 68 converter. You will probably have to special order
>from Adaptec. I had used the adapters many times in say 1987, but have not
>seen them since. Or you could replace the whole cable. One side having the
>scanner connection, c-50 the other side having db 68 to connect to the card.
>Some place like computer buyers warehouse might still carry them, but at a
>premium price.
>
>Ditt
>
>-----Original Message-----
>From: slug@nks.net [mailto:slug@nks.net] On Behalf Of Eben King
>Sent: Wednesday, December 29, 2004 3:41 AM
>To: SLUG Mailing List
>Subject: [SLUG] SCSI adapter?
>
>I have a SCSI card, which lspci says is an "Adaptec AHA-2940U/UW/D /
>AIC-7881U (rev 01)". It uses aic-7xxx.o . Its external port has 50(?
>68?) contacts. I don't know what it's called, but it's short and wide, and
>it looks like a mating plug is held into it by hooks, a pair on each end.
>(Never used it, not sure.) I also have a Microtek Scanmaker II, which has a
>Centronics 50 on it, which usually connects to the host through a cable
>whose other end is a DB-25. Those cables are easy to find; I have several.
>
>How would I connect this scanner to my computer?
>
>
>
Oddly, I may have that which you seek... Contact me off list and I will
have a look for it.

-Craig
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:43:15 EDT