Re: [SLUG] Temp captures

From: Chuck Hast (wchast@gmail.com)
Date: Sat Jul 07 2007 - 09:07:17 EDT


On 7/7/07, ronan <ronan@tampabay.rr.com> wrote:
> Chuck Hast wrote:
> > On 7/6/07, Chris Mathey <slug@mathey.org> wrote:
> >> Chuck Hast wrote:
> >> > I need to be able to capture temps from between 4 and 10 devices. I
> >> was
> >> > looking at the one wire solution, I need to get the data onto a web
> >> page so
> >> > the interested party can go in and look at the temps of his
> >> freezers. Any
> >> > local recommendations? There are one wire drivers for Linux, I just
> >> need to
> >> > come up with a nice solution that can be looked at with a browser.
> >> >
> >> >
> >>
> >> rrdtool.
> >> http://oss.oetiker.ch/rrdtool/
> >>
> >> I used to use it with MRTG.
> >>
> > Thanks to both of you. I just ordered samples of the DS18s20 OneWire (tm)
> > devices to use. I am going to try it with rrdtool. I also found the
> > following on
> > the web:
> > http://www.digitemp.com/
> > Somehow when I was looking the other day I missed that one.
> >
> I used a DS18s20 OneWire (tm) device before (with the 3-pin package
> soldered directly onto an RJ-11 cable coming out of a DB-9 connector).
> It worked (under Linux) exactly as it was supposed to. I didn't try it
> with more than one temperature sensor in a chain, but I would expect
> that to work too.
>
This is good info. " It worked (under Linux) exactly as it was supposed to"
is very good to see. I have ordered two samples, once I get it working I will
get some more and get this box finished...
It will have ZoneMinder for the cameras and some form of page to display
freezer temps.

-- 
Chuck Hast  -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS).  Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.



This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:46:22 EDT