I built up a laptop with RH 8.0 during the setup process when it
asked me if I needed tools to do X I did not check it, as I did not
think I needed to do so on this machine, well I now find out that
I do need those tools.
I went to find LINUXCONFIG and find that it is not on RH8 nor
even amoung the RPM's. In the past when I have needed to do
such additions I have used LINUXCONFIG. What is the replacement
because I am not sure what all I need to pull in in order to make
sure all of the X development stuff is in there. I suspect that it is
not much but RPM is notorious for telling you after the fact that
you need more "stuff" in order to finish whatever it is that you
are trying to do.
Please no lectures about your favorite distro, I am doing this
at the office, I have my own ideas too, but I have to use this,
at least it is not M$...
Chuck Hast
Telecomms Consultant, Utility Partners.
WEB www.utilpart.com
Office number: 813.282.8828
C-phone number: 813.765.6743
E-mail: wchast@utilpart.com
SMS < 150 characters: 8137656743@mobile.att.net
ARS KP4DJT
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going out
and
having to identify your bits and pieces in the midst of torn and twisted
metal."
*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.
Visit us on the web at http://www.utilpart.com
*****************************************************************
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 15:34:21 EDT